Manufacturing & tables
ABSOL is a natural absorbent and spill response product made from recycled material from the aerated concrete industry. By reusing waste from aerated concrete production, the raw material is given a new purpose instead of going to landfill. Manufacturing is based on natural raw materials such as sand, lime, cement and water. The material is processed and autoclaved under high pressure and high temperature, which creates the porous structure that gives ABSOL its high absorption capacity. After autoclaving, the material is crushed and sieved into different grain sizes to suit various applications.
01
Component composition
| Chemical formula | Weight percent |
|---|---|
| SiO₂ | 50–55 |
| CaO | 24–28 |
| Al₂O₃ | 3–6 |
| Fe₂O₃ | 1–2 |
| MgO | 0–1 |
| Small amounts of water-soluble substances (alkali sulfate and calcium sulfate) | 2–3 |
The oxides above are chemically bonded to each other into various types of hydrosilicates, e.g. CaO·SiO₂·H₂O.
02
| Liquid | Dosage |
|---|---|
| Oil | 3 litres ABSOL (blue) per 2 litres oil |
| Oil | 2 litres ABSOL Extra Fine (red) per 2 litres oil |
| Acid | 8 litres ABSOL (blue) per 2 litres acid |
| Acid | 6 litres ABSOL Extra Fine (red) per 2 litres acid |
03
The declaration refers, in accordance with the product designation, to the finished product or a component delivered separately.
ABSOL is packed in recyclable packaging.
ABSOL absorbs, contains and remediates hazardous liquids such as oil, paint, solvents and chemicals, and neutralises acids. ABSOL does not burn and provides effective slip protection. ABSOL makes a real difference. Compare for yourself in the tables below. Contact us for further information.
Table 1
| Sorbent type | Spec. area m²/g | Structure | Sorption | Liquid (General) | Liquid (Complete) | Chemicals (General) | Chemicals (Complete) | Acids (General) | Acids (Complete) | Fire: Before absorption | Fire: After absorption | Self-extinguishing |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inorganic porous, calcium silicate hydrate type, ABSOL | 30 | Cells | Absorption/ Adsorption | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Inorganic solid, sand, volcanic ash, clay, pumice type | 1–2 | Mineral grains | Adsorption | Yes | No | Yes | No | No | No | Yes | No | No |
| Organic porous, peat, paper, cardboard type | Fibre | Adsorption | Yes | No | Yes | No | No | No | Yes/No | No | No | |
| Organic solid, sawdust, chips, bark type | Fibre | Adsorption | Yes | No | Yes | No | No | No | No | No | No | |
| Polymeric porous | Solid, porous | Adsorption | Yes | No | Yes | No | Yes | No | No | No | No | |
| Polymeric solid | Grains | Adsorption | Yes | No | Yes | No | Yes | No | No | No | No |
Table 2
| Sorbent type | Petroleum / petrochemical products | Solvents | Ketones | Glycols etc. | Chlorinated hydrocarbons | Esters | Various prods. terp., linseed oils, dried oils | Acids | Oxidising substances | Bases |
|---|---|---|---|---|---|---|---|---|---|---|
| Application | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Inorganic porous, calcium silicate hydrate type, ABSOL | OK | OK | OK | OK | OK | OK | OK | OK | OK | OK |
| Inorganic solid, sand, volcanic ash, clay, pumice type | OK (off-gassing) | OK (off-gassing) | OK | some risk of corrosion, off-gassing | some risk of corrosion, off-gassing | OK | OK | OK some release nitrous gases | OK some rust observed | OK |
| Organic porous, peat, paper, cardboard type | fire risk | fire risk | OK | some risk of corrosion, off-gassing | some risk of corrosion, off-gassing | OK | self-igniting | heavy release of nitrous gases | fire risk explosion risk | OK |
| Organic solid, sawdust, chips, bark type | fire risk | fire risk | OK | some risk of corrosion, off-gassing | some risk of corrosion, off-gassing | OK | self-igniting | heavy release of nitrous gases | fire risk explosion risk | OK |
| Polymeric porous | fire risk | fire risk | OK | some risk of corrosion | some risk of corrosion | OK | self-igniting | OK | fire risk explosion risk | OK |
| Polymeric solid | fire risk | fire risk | OK | some risk of corrosion, off-gassing | some risk of corrosion, off-gassing | OK | self-igniting | OK | fire risk explosion risk | OK |
Table 3
| Sorbent type | Anti-slip (Before absorption) | Anti-slip (After absorption) | Neutralising | Nitric acid NO₂ | Nitric acid residual | Violent and hazardous reactions | Environmentally friendly after acid absorption | Advantages on combustion |
|---|---|---|---|---|---|---|---|---|
| Inorganic porous, calcium silicate hydrate type, ABSOL | Yes | Yes | Yes | <0,5 | 5,2 | No | Yes | Yes |
| Inorganic solid, sand, volcanic ash, clay, pumice type | Yes | Yes/No | No | ppm 15→25 <0,5 | % 80–95 87 | Yes/No | No | No |
| Organic porous, peat, paper, cardboard type | Yes/No | No | No | >50 | 90 | Yes | No | Yes/No |
| Organic solid, sawdust, chips, bark type | No | No | No | >50 | 90 | Yes | No | Yes/No |
| Polymeric porous | No | No | No | <0,5 | 85 | No | No | No |
| Polymeric solid | No | No | No | <0,5 | 85 | No | No | No |